Welcome to the Online Shop

MINACO, Dolls house 1/12th roof  tile moulds & casting pack.

The moulds are simple to use, just mix the powder with water, pour into the mould and level off with the squeegee provided, wait for the mixture to set, flex the mould and the tiles will drop out. You could save yourself £££'s, use the moulds over and over again.

You are buying two moulds, the standard tile mould plus the tile & half mould (known as a Grandad tile, needed to finish the roof edge off properly) plus ½kilo casting powder.

Complete with instructions and enough casting material (½kg) to make approx. 400 tiles. Standard Tile mould makes 100  hanging tiles at a time. Tile & half mould makes 25 at a time.

The main  picture (right hand side) is a dolls house that has been tiled by one of customers using our moulds. He has blended different casting powder colours to give the tiles a more varied colours. The brick facings have been made by using our silicone rubber slip brick mould.

Note: You are buying the 2 moulds and casting material only, (picture to the left)

BUY NOW FOR ONLY £16.99

 

Extra tile casting powder is available in various colours at £6.50 per ½ kilo when ordered with the above. 

Quantity:
Options:
Buy Now:

1/12th Scale rustic block mould with ½ kilo of casting powder, mould makes 35 paving tiles at a time, perfect for facing on dollhouses, walls etc.

Each cast measures approx. 30mm x 19mm x 4mm

 ONLY £13.99

Quantity:
Options:
Buy Now:

Tile Casting Powder for use with Minaco Dolls house roof tiles and brick or slip moulds.

See our ebay shop for all the moulds that are available.

 Colour: Slate Grey (SHOWN)  other colours: Pink Buff, Tudor Red & Sandstone,Antique Red

 500 gram bag £6.50 

Can despatch overseas, enquire for postage costs

Quantity:
Options:
Buy Now:

1/12 scale silicone miniature brick mould

 Beautifully made mould in high quality silicone rubber. You can cast your own miniature bricks with  frogged middle and faced on all four sides, can be laid as real bricks with cement based adhesive or with PVA glue.

Create free standing houses, outbuildings, garages, fireplaces, wishing wells, garden walls etc.

Easy to cut.  You can cast these in moulding plaster and stain them afterwards,( or use special Minaco casting powder) each mould ( 20 bricks) fill would use approximately 30 grams  of powder.

Mould Price only £16.99 Buy now while stocks last!

 

Quantity:
Buy Now:

Silicone Dolls house 1/12th scale slip brick mould

 Makes  100 slips at a time you can save £££'s by making your own, so easy to use, just mix and fill!  Fantastic high quality mould.  ONLY  £16.99

 Slip casting powder in different colours available. 500 grams makes 1200 slips

Quantity:
Buy Now:

1/12th Scale plain tile or paving mould with ½ kilo of  casting powder, (sandstone shown) mould makes 15 paving tiles at a time, perfect for dollshouse kitchen floors,garden paths, patios, driveways etc.

Each tile measures approx. 37mm x 37mm x 3mm

Choice of Casting Powders: Sandstone/Grey/Pink Buff/Antique Red/Tudor Red

 PRICE ONLY £11.99

Quantity:
Options:
Buy Now:

1/12th Scale brick patterned paving mould with ½ kilo of casting powder, mould makes 15 paving tiles at a time, perfect for dollshouse garden paths, patios, driveways etc.

Each cast measures approx. 37mm x 37mm x 3mm

BUY IT NOW FOR ONLY £11.99

Quantity:
Options:
Buy Now:

Dolls House shaped roof tile mould,  makes 25 paving tiles at a time, Each cast measures approx. 31mm x 19mm x 3mm

 ONLY £3.99

Quantity:
Buy Now:

Dolls House rectanglar  roof tile mould,  makes 25 tiles at a time, Can be used over & over again. Each cast measures approx. 31mm x 19mm x 3mm. Use Minaco tile casting powder to make your tiles.

 ONLY £3.99

Quantity:
Buy Now:

 

1:12th DOLLS HOUSE CEILING ROSE SILICONE MOULD No.M16

Diameter  40mm -  approx. 1.5" (approx)

Beautifully designed, Silicone mould manufactured by Minaco, a superior quality mould that will not distort when being filled. 
Can be used over and over again, with this mould you can make beautiful ceiling rose for just a few pence each.

Can be used to cast in Resin, Stonecasting, Moulding powder or plaster of Paris
Flat back, easily fixed in position with either PVA or General purpose adhesives

 

Quantity:
Buy Now:

 

1:12th DOLLS HOUSE CEILING ROSE SILICONE MOULD No.M14

Diameter  40mm -  approx. 1.5" (approx)

Beautifully designed, Silicone mould manufactured by Minaco, a superior quality mould that will not distort when being filled. 
Can be used over and over again, with this mould you can make beautiful ceiling rose for just a few pence each.

Can be used to cast in Resin, Stonecasting, Moulding powder or plaster of Paris
Flat back, easily fixed in position with either PVA or General purpose adhesives.

Quantity:
Buy Now:
Make payments with PayPal - it's fast, free and secure!